Product ID:SCOTCH-WELD (R) EPOXY ADHESIVE 2158A
MSDS Date:11/01/1985
FSC:8040
NIIN:00-430-8261
MSDS Number: BDYQS

3M CO. ADHESIVES COATINGS AND SEALERS DIV.

3M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 04963

3M MINNESOTA MINING AND MFG CO ADHESIVES SEALERS DIV

SAINT PAUL, MN 55144-1000 US

Telephone: 800-364-3577/651-737-6501(24 HOURS)

Cage: 04963

POLYAMIDE RESIN (-% INCL W/CURING AGENT)

ACGIH TLV: N/D

CURING AGENT

Fraction By Weight: 36.0%

ACGIH TLV: N/D

CALCIUM CARBONATE (MARBLE) (LIMESTONE)

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9192

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192

CLAY AND PIGMENT

Fraction By Weight: 64.0%

Effects of Overexposure:EYE:SEVERE IRRT.INH:IRRT.INGEST:LOW
TOXICITY.SKN:IRRT, SENSITIZATION POSSIBLE FOR SOME. (SEE PRECAU)

First Aid:EYE: FLUSH 10 MIN W/COPIOUS WATER, CALL PHYS. SKIN: WASH
THOROUGHLY SOAP & WATER. INHL, INGEST: REMOVE TO FRESH AIR FROM
SOURCE OF DUST. WASH CONTAMINATED CLOTHING BEFORE REUSE.

Extinguishing Media:CO*2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:USE SCBA WHEN FIGHTING FIRES INVOLVING THIS
MATERIAL.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:VENTILATE CONFINED AREAS. COLLECT SPILLAGE,
CLEAN UP RESIDUE, WIPE UP AREA, PLACE IN METAL CONTAINER.

Handling and Storage Precautions:AVOID EYE, SKN CONTACT FROM CURING
VAPORS. AVOID EYE, INHL CONTACT W/DUSTS FROM GRINDING, CUTTING OF
CURED RESIN

Ventilation:VENT CURING OVENS TO OUTDOORS. LOCAL, MECH VENTILATION.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE
Supplemental Safety and Health
PT A OF TWO PART KIT.UPDATE PER MSDS(OSHA) 1 NOV 85 DOC#1031632.
3MID#:62-2159-XXXX-X. KIT P/N: 2158B/A;ID#62-2158-XXXX-X. KEY1:N1.

HCC:N1
Spec Gravity:1.54
Viscosity:200/800000CPS
Solubility in Water:NOT SOLUBLE
Appearance and Odor:GRAY PASTE
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO, CO*2, NITROGEN DECOMP PRODUCTS
INCL HCN

Waste Disposal Methods:CURED TWO-PART RESIN DISPOSABLE IN SANITARY
LANDFILL. INCINERATE UNCURED PASTE IN APPROVED INCINERATION
FACILITY IAW ALL APPLICABLE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.